Low Volume production by silicone molding

Silicone mold is one of the ways to make a prototype. The advantage is that time is fast, cost is small, and the probability of processing failure is small. More than 20 identical products can be made using a silicone mold. The material of the product can be: ABS, PP, PC, PMMA, POM, high temperature resistant material, soft rubber, silicone rubber and so on.

The silicone mold making step can be divided into three steps.


Before making a silicone mold, you need to make a prototype. The prototype can use the more common ABS material, CNC machining can be.

2. Silicone mold
After the prototype is ready, start making silicone molds.

After eight hours of drying, the silicone mold was cut open and the prototype was taken out. At this point, the silicone mold is ready.

3. Injection type
The liquid gum material is injected into the silica gel mold and dried.

The life of the silicone mold is approximately 20 molds.

FP is a reliable supplier offering low volume production by CNC prototyping,vacuum casting,CNC machining;  and large volume production by plastic injection  molds and moldings.

Any project we can talk, welcome to contact us..



FP Industry Co.,Ltd | CNC machining | Rapid Prototype| Plastic Injection Parts

CopyRight 2010 All Right Reserved FP Industry Co.,Ltd | Die Casting Tool |Die Casting Mold | Plastic Mold   Powered by JchenCMS  Sitemap